Friday, April 12, 2013

Sometimes You Just Need an Ax

So, I found myself needing a new caving ax. My previous version was hot forged out of a leaf spring and hafted into the handle in a rather primitive style. During the Easter trip home I hit the flea markets with my father-in-law with the intentions of picking up a antiuqe, vintage, or just plain rusty ax head I could modify for my purposes.

Thanks to my my bargain hunting buddy's quick eye, and a five dollar bill I came into possession of this high carbon lovely patina bearing beauty.

It quickly occurred to us that twice the blades meant two axes if I was careful while rough cutting.

I chunked a two dollar cutting wheel on the 4.5" angle grinder and I had two ax head blanks.The primary concern is overheating the cuttig edge, but a nearby bucket of water keeps the heat in check. An occasional quick dip was all that was needed.

The general idea was a pair of bearded axes.

Some additional shaping with with a grinding wheel and a 40 grit flap sander yeilded a couple of pleasing shapes.There was little attention given to the surface finish, as the intention is to induce rust pitting, followed by a vinegar etching. The rust is encouraged by soaking the steel in a bleach and salt water solution. It is pointless to do any sharpening before this step. The cutting edge would just get eaten away. The additional swirls, scratches, and imperfections make me smile, so I skipped the polishing. After a few years of handling the steel should develop a nice warm patina that invites you to handle and use the the tool without fear of hurting it. I like my gear to be attractive, yet still rugged.

To that end, the first piece and the smaller of the two, got a hand cut oak handle. A red oak trim board could have been obtained easily enough, but that would have underminded the intended idea and aesthetic.

I found a suitable piece of oak in a pile of five inch thick branches that were rescued last month, before they could make the trip to the dump. After the general shape was carved the head was mounted.

The final shaping and sanding process was followed by a ferric acetate wood stain. This sounds impressive, but it is pretty simple. Soak some fine oil free steel wool in vinegar for at least twenty-four hours. When you brush this solution on a tannin heavy wood like oak the tannins react with the iron and turn a deep grey black. If the wood you want to stain is not tannin rich, brew some strong black tea and brush it over the wood. Let it dry, and then apply the vinegar solution.

I followed that up with a commercial walnut colored stain and seal in one that I had lying around. The result is a deep brown with heavy black sinews.


The unique bone shape is an artifact caused by a nasty looking knot at the base of the handle. Once I carved around it I fell in love with the extra detail. The grip is extremely comfortable and feels natural. The heft and balance are perfect whether battoning or carving up close. There is a slight twist along the length that makes the aim instinctive. The steel isn't as high carbon as it could be, but it has held an edge well under pretty heavy use. Overall I couldn't be more pleased with the results, and now I have a nice ax to carve the handle for his big brother.

Tuesday, March 26, 2013

Welcome to the house.

I'm into a lot of stuff. There are so many cool things out there, how can I not be. I'm a recently reignited writer, amateur carver, fledgling black smith, wannabe vintage bike builder, sometime scrap artist, and all around scrounger. The proverbial jack you have heard so much about.

What do these things all have in common? Simple, the fine art that is creating something from next to nothing. Call it up-cycling, trash to treasure, scrapping, eco-living or whatever else they are calling it now.

I sum it up in my online moniker "CrescentSon". In British heraldic traditions the eldest son inherited the fathers coat of arms. The second born took a symbol, a crescent, called a mark of cadency to distinguish his crest from his father's, and went out into the world to make his own name and fortune. Crescent Son is the embodiment of being that second born son, given little, and sent out to make what we may with it.


That's what I do. I scavenge, scrounge, and scrap from whatever is available, and make whatever comes into my little brain pan. Whether writing, building, or crafting, I start with nearly nothing and try to transform it into something useful.

I collect discarded tree trimmings from my neighborhood. That is where my carving wood comes from. I "mill" it down with basic tools and make spoons, bowls, plaques, cutting boards, magic wands, and... whatever might be handy.



My carving ax and knives were forged from files, springs, cable, and saw blades whose lives were otherwise over. My forge is a re-purposed water heater tank. My "bellows" started life as a vacuum motor. My anvil is a 3' piece of rail road track.

It constantly amazes me what can be made with raw resources, or what has been discarded by society. I feel compelled to share that with whoever might be interested, and hope to pick up whatever I can from those with something to offer. In a world where everything is engineered for planned obsolescence and made in a industrial factory by people who hate their jobs, nothing makes me happier than seeing the enjoyment one gets from making something  in the humblest settings that is intended to last. As we go along I hope to share what I find interesting with a group of like minded folks who are focused on using meager resources to scratch together a life worth loving.

I think the universal consciousness is beginning to shift towards those of us who don't need the latest, greatest, or newest to be happy. All it takes is what you already have, a bit of readily available knowledge, and the time that would just be wasted elsewhere.